Products

Sani-Plex 128M | Laboratory and Veterinary Disinfectant

Sani-Plex 128m - laboratory disinfectant
Skip to a section:

CHARACTERISTICS

(What to know about this product at a glance.)

Product ID: SP128M

Active Ingredients:

  • Alkyl dimethyl benzyl ammonium chloride(C12-16) (C.A.S. 68424-85-1) 2.0 – 4.0
  • Didecyl dimethyl ammonium Chloride(C.A.S. 7173-51-5) 2.0 – 4.0
  • Ethanol (C.A.S. No. 64-17-5) < 2%

Application Methods: quart spray bottle, hose end foamer, mop for general traffic areas

Characteristics: no added dyes, no added fragrances, stable when diluted, neutral ph when mixed, non-volatile

EPA Reg. No. 10324-155-46269

Summary

Sani-Plex 128M is a multipurpose, neutral pH, germicidal detergent and laboratory disinfectant that disinfects and cleans in one labor-saving step.

Sani-Plex 128M is also on the EPA’s List N, (EPA #:10324-155-46269) for Products with Emerging Viral Pathogens AND Human Coronavirus claims for use against SARS-CoV-2 making it a perfect laboratory disinfectant for those looking to protect both research models and staff. You can find more products that meet the EPA’s guidelines on emerging pathogens by checking out our COVID-19 page. 

Sani-Plex 128m is also the perfect disinfectant for animal care facilities, and carries a variety of animal pathogen claims that companion care facilities care about. To find the full efficacy sheet, look at the bottom of the page under “additional downloads”.

Effective in hard water up to 400 ppm hardness (Calculated as CaCO3) in the presence of 5% serum contamination, this product is for use on hard, non-porous surfaces in: Veterinary clinics, animal life science laboratories, animal laboratories, animal research centers, animal quarantine areas, animal holding areas, dog/cat animal kennels, pet animal quarters, pet shops, operating rooms, washing areas, waiting rooms, examination rooms and other animal care facilities.

Frequently Asked Questions

What Pathogens is Sani-Plex 128m Effective Against?

This laboratory disinfectant has EPA registered claims against over 80 pathogens including gram-negative and gram-positive bacteria, human and animal viruses and fungus and mildew. To find the full efficacy sheet, look at the bottom of the page under “additional downloads”.

What Types of Surfaces Is Sani-Plex 128m Recommended For?

Use this product on washable, hard, nonporous surfaces of:

  • Counters and countertop laminates
  • stovetops
  • Sinks {bathroom, kitchen},
  • Tub surfaces,
  • Coolers,
  • Freezers
  • Appliances
  • Non-food contact equipment
  • Sealed floors
  • Finished floors
  • High speed burnished floors
  • Conductive flooring
  • Walls
  • Ceilings
  • Fixtures
  • Glass surfaces
  • Aluminum
  • Brass
  • Copper
  • Laminated surfaces
  • {non-medical} metal
  • {non-medical} plated or stainless steel
  • Glazed
  • Porcelain
  • Glazed {restroom} tile
  • Glazed {restroom} ceramic
  • Sealed granite
  • Sealed marble
  • Plastic (such as polycarbonate, polyvinylchloride, polystyrene or polypropylene}
  • Sealed limestone
  • Sealed slate
  • Sealed stone
  • Sealed terra cotta
  • Sealed terrazzo,
  • Chrome and vinyl
  • Plexiglas®
  • Enameled surfaces
  • Painted {finished} woodwork
  • Formica®
  • Vinyl and plastic upholstery
  • Washable
  • Wallpaper
  • Windows and mirrors
  • Painted surfaces
  • Tables
  • Chairs
  • Desks
  • Washable walls
  • Cabinets
  • Doorknobs and garbage cans/pails
  • Trash barrels,
  • Trash cans
  • Trash containers
  • Industrial waste receptacles and garbage handling equipment
  • Shelves
  • Racks and carts and door
  • Knobs and handles
  • Sealed foundations
  • Steps
  • Plumbing fixtures
  • Finished baseboards and windowsills
  • And other hard non-porous surfaces

Can Sani-Plex 128m Be Used in Veterinary Facilities?

Yes, this product is approved for use in veterinary facilities, and carries efficacy claims against many of the most common bacteria and viruses that these businesses face. For full efficacy information, please refer to the efficacy sheet under “additional downloads” at the bottom of the page.

What are the characteristics of Sani-Plex 128?

Product ID: SP128M

Active Ingredients:

  • Alkyl dimethyl benzyl ammonium chloride
    (C12-16) (C.A.S. 68424-85-1) 2.0 – 4.0
  • Didecyl dimethyl ammonium Chloride
    (C.A.S. 7173-51-5) 2.0 – 4.0
  • Ethanol (C.A.S. No. 64-17-5) < 2%

Application Methods: quart spray bottle, hose end foamer, mop for general traffic areas

Characteristics: no added dyes, no added fragrances, stable when diluted, neutral ph when mixed, non-volatile

What are the Storage and Disposal Directions?

PESTICIDE STORAGE: Store only in original container. Keep this product under locked storage sufficient to make it inaccessible to children or persons unfamiliar with its proper use.
PESTICIDE DISPOSAL: Triple rinse container {(or equivalent)} promptly after emptying. Triple rinse as follows: Fill the container ¼ full with water and recap. Shake for 10 seconds. Drain for 10 seconds after the flow begins to drip. Follow Pesticide Disposal instructions for rinsate disposal. Repeat this procedure two more times. Then offer for recycling if available or
puncture and dispose of in a sanitary landfill, or by incineration.

Does Sani-Plex 128m have a SARS-CoV-2 Claim?

Yes, Sani-Plex 128m Eliminates 99.9% of SARS-Related Coronavirus 2 (SARS-CoV-2) Virus (USA-WA1/2020) (the COVID-19 Virus) in 2 minutes on hard, non-porous surfaces.

Want to reach out now about Sani-Plex 128M?

Click the button below to get connected now!

How do you disinfect a vivarium?

Looking for a laboratory disinfectant for your vivarium? Looking for a vivarium cleaner for research facilities? When it comes to disinfecting vivariums, Sani-Plex 128M is the top choice. This multipurpose, neutral pH, germicidal detergent and laboratory disinfectant not only cleans but also provides effective disinfection in a single labor-saving step.

Wondering about the best way to clean a vivarium? Look no further. Sani-Plex 128M is specifically designed to be the ideal cleaning agent for vivariums, ensuring a thorough soil removal prior to disinfection. It eliminates harmful pathogens and provides a hygienic environment for your reptiles.

Sani-Plex 128M is not just any disinfectant; it is the ultimate solution for vivarium disinfection. It is effective in hard water conditions and can handle up to 400 ppm hardness in the presence of 5% serum contamination. Veterinary clinics, animal research centers, pet shops, and other animal care facilities can rely on Sani-Plex 128M to provide a safe and clean environment for animals.

For more detailed information, including the full efficacy sheet, please visit our website and navigate to the “additional downloads” section located at the bottom of the page. Trust Sani-Plex 128M to keep your vivariums clean, your reptiles healthy, and your peace of mind intact.

Video Tour

Need More Help With Your Chemicals?

Need more help? Fill out the form below to get connected to a Biosafety Account Manager now.

  • Live outside the US? You'll want to use our International Contact Form.
  • Provide a short word or phrase to get a faster, more detailed response
  • You can leave a more detailed question here
  • This field is for validation purposes and should be left unchanged.

Resources

Our Most Popular Products