Directions for use

A two-step process of cleaning prior to disinfection is required only when surfaces are grossly soiled or there is the possibility of contamination with blood or body fluid. Purefexion Wipes can be used for both cleaning and disinfecting.

1. It is recommended to always wear gloves when cleaning. These wipes are for cleaning surfaces, not for use on skin. Wear a cover gown and face protection in addition to gloves if cleaning up a large body fluid spill.
2. Pull cloth wipe from the container at 90^° angle making certain to position the wipe between the two pointing arrows appearing on the lid. This permits easy separation of cloths at perforation.
3. Unfold cloth and wipe surfaces until visibly wet. Allow solution to air dry.
   • Do not wipe the surface dry prior to adequate contact time. Wexford disinfectants contain humectants which evaporate slowly to prolong drying time. Although the surfaces may appear dry, there is still dampness or moisture present. This ensures complete bacteria kill.
4. Wipe or rinse any residual, after sufficient contact time, from shiny surfaces if needed.
5. Keep small center cap closed to prevent moisture loss from container.

Purefexion Wipes are classified by the EPA as Toxicity Category IV, which is the lowest level of toxicity under EPA regulations. This classification means the product has minimal toxicity concerns under normal use conditions.

• EPA category IV (lowest level of toxicity)
• No precautionary statements/PPE

Laboratory and Research Environments

• Biosafety cabinets and laminar flow hoods
• Workbenches and laboratory surfaces
• Equipment exteriors and control panels
• Microscopes and sensitive optical equipment
• Door handles and high-touch areas

Purefexion Wipes meet the standards of EPA’s “Designed for the Environment” (DfE)

• Hospital-grade wipe product that qualifies for DfE status
• Substrate is 100% plant-based and compostable
• Aligns with institutional sustainability initiatives