Quiptrol 3000 | Chlorine Dioxide Water Treatment Disinfectant

Quiptrol 3000 is registered with the U.S. EPA for water purification, certified by the
National Sanitary Foundation under the NSF/ANSI Standard 60 for drinking water, and
registered with the U.S. EPA-FIRFA as an anti-microbial pesticide. To find the full efficacy sheet, look at the bottom of the page under “additional downloads”.

EPA label directions specify a maximum dose of 5.0 ppm chlorine dioxide for animal drinking water treatment, with specific protocols for heavily contaminated water supplies and vaccination periods.

This product is intended for use to treat water which has been previously treated in accordance with the Safe Drinking Water Act (SDWA), such as that provided by municipal water treatment facilities. For most potable water systems, add Quiptrol 3000 to the water at a dose of between 1.5 ppm (1.5 mg/L) and 2.0 ppm (2.0 mg/L) chlorine dioxide (a dilution ratio 1:2000 to 1:1500). Under US EPA regulations, drinking water intended for human consumption may not contain more than 0.8 ppm (0.8 mg/L) residual chlorine dioxide no more than 1.0 ppm (1.0 mg/L) chlorite ion.

Chlorine dioxide (ClO2) products like Quiptrol 3000 are used in water treatment because they are an effective oxidant, biocide, and disinfectant at relatively low concentrations. It also has minimal reactivity with organic matter and minimal byproducts are formed during the treatment process.